A: The users of the two devices with Bluetooth technology should agree on a common passcode, and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a factory-set passcode.

1. Go to Menu > Connect. > Bluetooth > press the right scroll key to open the paired devices view. Before pairing, create your own passcode (1-16 digits), and agree with the owner of the other device to use the same code. The passcode is used only once.

2. To pair with a device, select Options > New paired device. The phone starts a device search. Select the device. Enter the passcode. The same passcode must be entered to the other device as well. After pairing, the device is saved to the paired devices view.

3. To define a short name (nickname or alias) for a paired device, scroll to the device, and select Options > Assign short name in the paired devices view. This name helps you to recognise a certain device during device search or when a device requests a connection.

To set a device to be authorised or unauthorised, scroll to a device, and select from the following options:
Set as authorised- Connections between your device and this device can be made without your knowledge. No separate acceptance or authorisation is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.
Set as unauthorised- Connection requests from this device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all.

Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately and the connection will be switched off.

Once your I-Geo has been paired with the Nokia 6680 successfully, you need to open TomTom Mobile 5 and let it communicate with your I-Geo through the serial COM port just paired using baud rate 4800.